Emulsion Anionic – Slow Setting
Bitumen Emulsion Anionic Slow Setting SS-1 and SS-1H
Chemical surface-active agents, which serve as Emulsifiers, are classified by the electrochemical charge that is attained when they dissociate in a water solution. In the case of ANIONIC EMULSIONS, the chemical charge is NEGATIVE. The chemical type and quantity of surface-active agent used in the manufacturing process governs the process in which the resulting asphalt emulsion can be used.
Tiger Cement Limited has the capability to Export and Supply the different Grades of Emulsion Bitumen Anionic Slow Setting SS-1 and SS-1H in compliance with National and International standards.
Emulsion Bitumen Anionic Slow Setting SS-1 and SS-1H Specifications
| Emulsion Anionic Bitumen Slow Setting SS-1 and SS-1H Specifications | |||
| PROPERTIES | SS-1 | SS-1H | |
| Tests on Emulsion | min-max | min-max | |
| Viscosity, SF, 25°C, SFs | 20 – 60 | 20 – 60 | |
| Viscosity, SF, 50°C, SFs | |||
| Sieve Test, #20, % | 0.1 max | 0.1 max | |
| Settlement, 5 days, % | 5 max | 5 max | |
| Storage Stability, 24h, % | |||
| Demulsibility, 35ml CaCl2 0.02N, % | |||
| Cement Mixing Test, % | 2 max | 2 max | |
| Coating Test, % | 80 min | 80 min | |
| Residue by Distillation, 260°C, % | 55 min | 55 min | |
| Oil Portion of Distillate (V/M), % | |||
| Particle Charge | ( – ) or 0 | ( – ) or 0 | |
| Tests on Residue | |||
| Penetration, 25°C, dmm | 100 – 200 | 40 – 100 | |
| Solubility in TCE, % | 97.5 min | 97.5 min | |
| Ash Content, % mass of res | |||
| Ductility, 25°C, cmFloat Test, 60°C, sec | 40 min | 40 min | |
| Float Test, 60°C, sec | |||
Packing
- 220 (Liter) New Steel Drum
- 230 (Liter) New Steel Drum
- 240 (Liter) New Steel Drum
Other Bitumen Products
Penetration Bitumen
Oxidized Bitumen
Cutback Bitumen
Coat Bitumen
Emulsion Bitumen
Performance Grades Bitumen
Australian Standard Bitumen
Viscosity Grades Bitumen
